Veekmas FG 5 C
Veekmas FG 5 C has been especially designed for continuous use in arduous underground conditions. This unique low-profile motor grader has been manufactured paying attention to high performance and low operating costs.
Power and accuracy
The highly strengthened main frame and the chassis together with the wear-resistant components make 9 ton Veekmas FG 5 C ideal for operating in hard rock mining conditions. The technical solutions make it easier to operate effectively in small dimensional and sharply curved mine gallaries.
The driving capacity is exceptional for such a small motor grader as its all-wheel drive system is exceedingly efficient. The frame articulating joint is situated in front of the canopy/cabin which eases turning and reduces outer turning radius. The middle blade can make a circle whose diameter is 140 cm.
Comfortable canopy/cabin
The ROPS and FOPS certified canopy/cabin offers safety and increased operating comfort. The instrumentation and the controls are conveniently located and readily visible for ease of operation. These features coupled with the exceptional maneuverability enable the motor grader to be readily operated whilst still maintaining the excellent operator visibility.
Blade shock suspension system
Low oil pressure and advanced hydraulic system with an automatic hydraulically operated blade shock suspension installation give the motor grader increased ability to absorb impact damage normally associated with hard mining circumstances. It means that the middle blade moves up to 10 cm upwards without jumping the motor grader itself when driven over materials too hard to grade down at the desired level, for example, rocks that protrude over the road level. When needed, the system can be switched off.
High standard of equipment
The motor grader has as standard, for example, front blade, fully protected underneath with two bottom plates, front wheels anti-slip regulation, electronic control and monitoring system, versatile blade automatism as well as openable side windows on both sides on a cabin. There is a joystick-steering facility to be used when operating the machine in working speed. Among other things, closed cabin with automatic air-condition and openable side windows on both sides, CD-player/radio, automatic air-condition, brakes for front wheels, fire extinguisher systems, oil purification system for hydraulic system, blade teeth frame, and reversing camera system are available as option.
Technical specification
Weight:
Weight (excluding optional equipment and extra weights) 9,200 kg
Dimensions:
Height 1,990 mm
Width 2,100 mm
Length 7,100 mm
Wheel base 4,350 mm
Outside turning radius (without a front blade) 4,400 mm
Outside turning radius (with a front blade) 4,900 mm
Engine:
Alternative 1:
Mercedes-Benz OM 904 LA
90 kW / 2,200 rpm
EU Stage IIIA
Turbocharger
Electronic control
Turbocharger
Intercooler
Warning light for overheating and low oil pressure
Openable engine bonnet
Alternative 2:
Deutz TCD 3.6 L4
90 kW / 2,300 rpm
EU Stage IV
Electronic control
Turbocharger
Intercooler
Warning light for overheating and low oil pressure
Openable engine bonnet
Alternative 3:
Deutz BF4M 2012
74 kW / 2,300 rpm
EU Stage II
Turbocharger
Warning light for overheating and low oil pressure
Openable engine bonnet
Transmission:
Heavy duty hydrostatic drive system with electrically contolled hydraulic drive pumps / hydraulic drive motor
All-wheel drive
Max transfer speed 20 km/h
Front Axle:
Hydraulic hub motors
Rear Axle:
Single rear axle
Planetary gears
100% differential gear lock
Dual-circuit hydraulic pressure operated oil-immersed disc service brakes
Low oil pressure warning system
Spring Applied Hydraulic Release (S.A.H.R.) parking and emergency brakes, effect on rear axle
Four-wheel drive
Tanks:
Fuel tank 129 litres
Hydraulics:
Iqan-controlled, load sensing system with automatically self-adjusting hydraulic output
Pre-control, electronically pre-controlled valves
Steering:
Hydrostatic front wheel steering
Hydrostatic side impact protected frame steering ±40°
Tires:
Size 12.00–20
Sliced tread pattern blocks
Middle Blade:
Blade shock suspension installation
Length 2,740 mm (9 ft)
Blade cutting edges
Material thickness 15 mm
Height 390 mm + 60 mm
Max ground clearance 220 mm
Blade rotation by hydraulic cylinders 2 pcs
Blade turns 65° to the left and 65° to the right
Overloadprotection
NOTE: A front blade is as standard
Length 2,000 mm
Up/down
Hydraulic control
Cabin:
ROPS and FOPS certified canopy
As optional:
Cabin
