Veekmas FG 7 C

  • Veekmas FG 7 C 2015.jpg
  • Veekmas FG 7 C.JPG
  • DSC_3880.jpg
  • DSC_3820.jpg
  • IMG_0745 web.jpg
  • IMG_0755 web.jpg
  • FG 7 C Pyhäsalmi Mine 001.jpg
  • Veekmas FG 7 C Pyhäsalmi Mine good quality.jpg
  • Veekmas FG 7 C 2015.jpg
  • Veekmas FG 7 C.JPG
  • DSC_3880.jpg
  • DSC_3820.jpg
  • IMG_0745 web.jpg
  • IMG_0755 web.jpg
  • FG 7 C Pyhäsalmi Mine 001.jpg
  • Veekmas FG 7 C Pyhäsalmi Mine good quality.jpg

Veekmas FG 7 C has been especially designed for continuous use in arduous underground conditions. It is somewhat more powerful, heavier, higher and wider than its sister model Veekmas FG 5 C. This unique low-profile motor grader has been manufactured paying attention to high performance and low operating costs.

Power and accuracy

The highly strengthened main frame and the chassis together with the wear-resistant components make 10 ton Veekmas FG 7 C ideal for operating in hard rock mining conditions. The technical solutions make it easier to operate effectively in small dimensional and sharply curved mine galleries.

The driving capacity is exceptional for such a small motor grader as its all-wheel drive system is exceedingly efficient. The frame articulating joint is situated in front of the canopy/cabin which eases turning and reduces outer turning radius. The middle blade can make a circle whose diameter is 145 cm.

Comfortable canopy/cabin

The roomy ROPS and FOPS certified canopy/cabin offers safety and increased operating comfort. The instrumentation and the controls are conveniently located and readily visible for ease of operation. These features coupled with the exceptional maneuverability enable the motor grader to be readily operated whilst still maintaining the excellent operator visibility.

Blade shock suspension system

Low oil pressure and advanced hydraulic system with an automatic hydraulically operated blade shock suspension installation give the motor grader increased ability to absorb impact damage normally associated with hard mining circumstances. It means that the middle blade moves up to 10 cm upwards without jumping the motor grader itself when driven over materials too hard to grade down at the desired level, for example, rocks that protrude over the road level. When needed, the system can be switched off.

High standard of equipment

The motor grader has as standard, for example, front blade, adjustable and air cushioned operator seat as well as openable side windows on both sides on a cabin. There is a joystick-steering facility to be used when operating the machine on working gears. Among other things, closed cabin, CD-player/radio, automatic air-condition, brakes for front wheels, fire extinguisher systems, oil purification system for hydraulic system, blade teeth frame, and reversing camera system are available as option.

Technical specification

Weight:

Weight (excluding optional equipment and extra weights) 9,800 kg

Dimensions:

Height 2,460 mm
Width 2,220 mm
Length 7,700 mm
Wheel base 4,800 mm
Outer turning radius (without a front blade) 4,450 mm
Outside turning radius (with a front blade) 4,950 mm

Engine:

Alternative 1:

Mercedes-Benz OM 904 LA
90 kW / 2,200 rpm
EU Stage IIIA
Electronic control
Turbocharger
Intercooler
Warning light for overheating and low oil pressure
Openable engine bonnet

Alternative 2:

Deutz TCD 3.6 L4
90 kW / 2,300 rpm
EU Stage IV
Electronic control
Turbocharger
Intercooler
Warning light for overheating and low oil pressure
Openable engine bonnet

Transmission:

Heavy duty hydrostatic drive system with electrically controlled hydraulic drive pumps / hydraulic drive motor
All-wheel drive
Max transfer speed 20 km/h

Front Axle:

Hydraulic hub motors

Rear Axle:

Single rear axle
Planetary gears
100% differential gear lock
Dual-circuit hydraulic pressure operated oil-immersed disc service brakes
Low oil pressure warning system
Spring Applied Hydraulic Release (S.A.H.R.) parking and emergency brakes, effect on rear axle
Four-wheel drive

Tanks:

Fuel tank 150 litres

Hydraulics:

IQAN-controlled, load sensing system with automatically self-adjusting hydraulic output
Pre-control, electronically pre-controlled valves

Steering:

Hydrostatic front wheel steering
Hydrostatic side impact protected frame steering ±40°

Tires:

Size 12.00–20
Sliced tread pattern blocks

Middle Blade:

Blade shock suspension installation
Length 3,050 mm (10 ft)
Blade cutting edges
Material thickness 20 mm
Height 440 mm + 60 mm
Max ground clearance 300 mm
Blade rotation by hydraulic cylinders 2 pcs
Blade turns 65° to the right and 65° to the left
Overload protection

NOTE: A front blade is as standard
Length 2,000 mm
Up/down
Hydraulic control

Cabin:

ROPS and FOPS certified canopy

As optional:

Cabin